Shop Fit Out in Sandgate, Brisbane
Sandgate is a bayside town on Brisbane’s northern edge, with a main street of cafes, restaurants and specialty shops, historic buildings and a long foreshore. We handle shop fit-outs for cafes, shops, clinics and offices, from layout to handover. Phone 0450 963 633 to start planning.
A historic bayside main street
Sandgate’s main street has older buildings with character facades, and some may fall under heritage or character controls that limit external changes. Inside, timber floors and older drainage are common. Bayside air means exposed fixings need careful selection. We check the building’s constraints, plan services to suit and design joinery that complements the period details.
Joinery made for the space
Off-the-shelf units rarely fit an older Sandgate tenancy. We draw joinery to measured dimensions, allow for uneven walls and floors, and specify materials that suit the wear each piece will take, from a display plinth to a back-bar cabinet.
Food plans and council
Before fitting out a food tenancy, many councils ask for plans showing the floor layout, hydraulics and any exhaust. For a Sandgate cafe or restaurant we prepare the layout so those plans can be drawn without later changes to the kitchen.
Power where people work
Every station in a Sandgate fit-out needs power at the right height: registers, screens, chargers, mixers and tools. We mark each outlet on the drawings with the joinery so cables are hidden and reachable.
Sandgate commercial fit-out work
- split and ducted air conditioning
- staff amenities and toilets
- data cabling for point of sale
- shopfront and signage power
- commercial hot water
Water filtration and equipment feeds
Coffee machines, ice makers and some dishwashers need filtered water and backflow protection. In a Sandgate fit-out we route those feeds inside the joinery with isolation valves so the equipment can be serviced easily.
Drawings and the certifier
Our architect prepares the drawings, engineers assist with hydraulic, electrical and mechanical items where the job needs them, and an independent licensed building certifier assesses the building work. For a Sandgate fit-out we keep those parties working from the same set.
Licensing at a glance
QBCC licence 15409163, including the shopfitting trade contractor class. Electrical Contractor Licence 91748 (Queensland). ABN 62 672 328 853. We are based in Toowong, Brisbane.
Frequently asked questions
Who pays for trade waste and a grease arrestor?
It depends on the lease. Approval with Urban Utilities is generally tied to the property, so landlord and tenant should agree early who applies and who pays for the arrestor.
Do you handle plumbing and electrical yourselves?
Yes. Plumbing and drainage work is under our QBCC licence and wiring under our Queensland electrical contractor licence, so services are planned with the joinery.
Also covering
If you are looking nearby, see shop fit-out in Bracken Ridge, Geebung and Chermside. Everything else is on the Shop Fit Out page and our home page.
Send us the plan
Email the lease plan or a sketch to cockatooservices@gmail.com, phone 0450 963 633, or write to us through the contact page.
